UVM Physical Plant Dept. Personal Protective Equipment (PPE) Requirements

The following is not an all inclusive list.


Should a Job Task be identified that is not listed,
contact TCO (656-7233) for a Job Hazard Analysis.

Job tasks have been categorized under the following areas:

      • Automotive
      • Central Heat Plant
      • Electrical
      • General Maintenance & Hand Tools
      • Grounds Maintenance
      • Hot Work Practices
      • Plumbing & HVAC
      • Power Tools – Air, Fuel & Electric
      • Recycling & Surplus

Job Task

Potential Hazards

Required PPE Equipment

Automotive
Air Tools Flying Objects or Dusts, Sound Levels ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Hearing Protection either Plugs or Muffs
Automotive Paint Spraying Mists, and Vapors Nitrile Gloves as needed, Closed Toe Footwear, Coveralls, Full Face w/ P100/OV cartridges
Other Requirements: Ensure adequate ventilation
Automotive Sand Blasting Flying Objects or Dusts Closed Toe Footwear, Coveralls, Sand Blasting Helmet/Hood Respirator
Other Requirements: Ensure adequate ventilation
Belt Grinder or Hand Held Grinder – Metal Flying Objects, Cuts, Sound Levels, ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants
Hand Tools (General) – Wrenches, Hammers, etc. Flying Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Closed Toe Footwear
Parts Washer (Solvent Base) Solvent Splashes and Sprays ANSI Z87 Approved Safety Goggles, Rubber Gloves, Closed Toe Footwear
Torch Cutting and Grinding Flying/Piercing & Hot Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Leather Work Gloves, Closed Toe Footwear, Cotton Coveralls, Hearing Protection either Plugs or Muffs, Faceshield
Other Requirements: Follow UVM’s Hot Work Permit Program for all spark generating activities.
Tow Truck Operation Struck by, falling loads ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, ANSI VEST
Welding Flying/Piercing & Hot Objects, Falling Objects ANSI Z87 Approved Safety Glasses, Welding Gloves, Closed Toe Footwear, Apron and Arm Guards, N/A with ventilation, Welding Helmet
Other Requirements: Follow UVM’s Hot Work Permit Program for all spark generating activities.
Wire Wheel Work Flying Objects and Small Particles, Sound Levels, and Cuts ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants, Hearing Protection either Plugs or Muffs, Faceshield
Carpentry & Painting
Belt Grinder – Metal Flying Objects, Cuts, Sound Levels, ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants, Hearing Protection either Plugs or Muffs
Bucket Truck Operation Overhead Hazards, Falls Closed Toe Footwear, Hardhat
Fall Protection: Body Harness & Lanyard
Cutting Lumber – Circular Saw, Sawzall, Jig Saw Flying Objects/Dusts, Cuts, Sound Levels ANSI Z87 Approved Safety Glasses, Closed toe shoe, Long Pants, Hearing Protection either Plugs or Muffs
Cutting Wheel or Grinding (Small Tasks) Flying Objects, Cuts or Hot Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long Pants, Hearing Protection either Plugs or Muffs
Drilling Flying Objects ANSI Z87 Approved Safety Glasses, Closed toe shoe
General Roofing Activities Falls, Flying Objects, Cuts ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long Pants, Hardhats as Needed
Other Requirements: Fall Restraint or Fall Arrest Protection Required if Necessary.
Glass Cutting & Glass Removal Flying Objects, Cuts ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long Pants
Graffiti Removal – Chemical Chemical Hazard ANSI Z87 Approved Safety Glasses, Rubber Gloves, Closed Toe Footwear
Fall Protection: Fall Protection As needed (Fall Exposure greater than 6ft)
Hammer Drilling Flying Objects and Dust, Sound Levels ANSI Z87 Approved Safety Glasses, Closed toe shoe, Long Pants, Hearing Protection either Plugs or Muffs
Hand Tools (General) – Saw, Scrapers, Hammers, etc. Flying Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Closed Toe Footwear
Key Stamping and Cutting Flying Objects & Fine Particles, Sound Levels ANSI Z87 Approved Safety Glasses, Closed Toe Footwear
Latex Paint Brush/Roller Flying Droplets & Vapors
Fall Protection: Fall Protection As needed (Fall Exposure greater than 6ft)
Other Requirements: Ensure Adequate Ventilation
Oil Base Paint Brush/Roller Flying Droplets & Vapors Nitrile Gloves
Fall Protection: Fall Protection As needed (Fall Exposure greater than 6ft)
Other Requirements: Ensure Adequate Ventilation
Paint Spraying Flying Mists & Vapors Half Face Respirator (with Safety Glasses) or Full Face Respirator, Nitrile Gloves, Closed toe shoe, Coveralls
Fall Protection: Fall Protection As needed (Fall Exposure greater than 6ft)
Other Requirements: Respiratory Protection Required
Planer (Power Hand) Flying Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Closed toe shoe, Long Pants, Hearing Protection either Plugs or Muffs
Power Washer Flying Mists ANSI Z87 Approved Safety Glasses, Rubber Gloves, Closed toe shoe, Coveralls or Rain Suit
Sand Blasting Flying Objects/Dusts, Cuts, Sound Levels Sand Blasting Helmet/Hood Respirator, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Coveralls, Hearing Protection either Plugs or Muffs
Sanding (Hand Powered) – Treated Wood, Plexiglas, Sheetrock, etc. Flying Objects & Harmful Dusts, Sound Levels ANSI Z87 Approved Safety Glasses, Closed toe shoe, Long Pants, Hearing Protection either Plugs or Muffs
Sanding (Hand Powered) – Untreated Wood Flying Objects & Dusts, Sound Levels ANSI Z87 Approved Safety Glasses, Closed toe shoe, Long Pants, Hearing Protection either Plugs or Muffs
Scaffolding/Staging Setup Flying Objects, Falling Objects ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long Pants, Hardhats as Needed
Shop Tools – Planer Flying Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Long pants & No Loose Clothing, Hearing Protection either Plugs or Muffs
Shop Tools – Sander, Bench Saw, Drill Press, Shaper Flying Objects ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Long pants & No Loose Clothing
Shop Tools – Wood Laithe Flying Objects ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Long pants & No Loose Clothing
Solvent Work – Epoxy, Sealing, Painting Flying Objects and Dusts, Cuts ANSI Z87 Approved Safety Glasses, Rubber Gloves, Closed toe shoe, Coveralls
Other Requirements: Ensure Adequate Ventilation. Respiratory Protection if recommended by Manufacturer.
Central Heating Plant
Air Tools Flying Objects and Sound Levels ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants, Hearing Protection either Plugs or Muffs
Boiler – Power Washing Flying Objects ANSI Z87 Approved Safety Glasses, Rubber Gloves, Closed Toe Footwear, Rain Suit
Other Requirements: Follow UVM’s Confined Space Program.
Boiler / Polisher Internals Removal Flying Objects or Dusts, Physical Contamination ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Elbow & Knee Pads, Long Pants or Coveralls
Other Requirements: Follow UVM’s Confined Space Program.
Cut off Wheel Work Flying Objects and Small Particles, Sound Levels, and Cuts ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Cotton Coveralls, Hearing Protection either Plugs or Muffs, Faceshield
Other Requirements: Follow UVM’s Hot Work Permit Program for all spark generating activities.
Fire Box Sweeping Flying Objects or Dusts, Heavy Metal Contamination Rubber Gloves, Closed Toe Footwear, Coveralls, Full Face w/ P100 Filters
Other Requirements: Follow UVM’s Confined Space Program.
Hand Tools (General) – Saw, Wrenches, Hammers, etc. Flying Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Long pants
Power Tools (General) – Saws, Drills, etc. Flying Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Long pants, Hearing Protection either Plugs or Muffs
Pump Repair Flying Objects or Dusts, Heavy Objects, and Cuts ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants
Other Requirements: Use mechanical hoist when moving/positioning pumps.
Soot Hopper Vacuuming Flying Objects or Dusts, Heavy Metal Contamination Rubber Gloves, Closed Toe Footwear, Coveralls, Full Face w/ P100 Filters
Valve Re-Packing Flying Objects or Physical Contamination ANSI Z87 Approved Safety Glasses, Rubber Gloves, Closed Toe Footwear, Long pants
Other Requirements: Follow UVM’s Lockout Tagout Program for de-energizing the system.
Wire Wheel Work Flying Objects and Small Particles, Sound Levels, and Cuts ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants, Hearing Protection either Plugs or Muffs, Faceshield
Electrical
Bulb and/or Ballast Change (De-Energized) Flying & Falling Objects, Dusts, Cuts ANSI Z87 Approved Safety Glasses, Electrial Rated shoe/boot, Long Pants, Hardhats as Needed.
Fall Protection: Other than ladder work; contact Supervisor for guidance
Bulb and/or Ballast Change (Energized) Flying & Falling Objects, Dusts, Cuts, Electrical Shock ANSI Z87 Approved Safety Glasses, Voltage Rated Gloves, Electrial Rated shoe/boot, Long Pants & Long sleeve cotton shirt, Hardhats as Needed.
Fall Protection: Other than ladder work; contact Supervisor for guidance
Other Requirements: Gloves needed until the circuit is deenergized
Maintenance work on 240V or less (Breakers, Recpticals, Switches etc). Electrocution, Shock, Burns, Arc Flash / Blast ANSI Z87 Approved Safety Glasses, Voltage Rated Gloves, Electrial Rated shoe/boot, Long Pants & Long sleeve cotton shirt
Fall Protection: Other than ladder work; contact Supervisor for guidance
Other Requirements: Use of Rubber Floor Mats
Maintenance work on 240V to 600V (Breakers, Recpitcals, Swtiches, etc.). Electrocution, Shock, Burns, Arc Flash / Blast ANSI Z87 Approved Safety Glasses, Voltage Rated Gloves, Electrial Rated shoe/boot, Long Pants & Long sleeve cotton shirt, Hardhats as Needed., Hearing Protection either Plugs or Muffs, Arc Rated Face Shield
Fall Protection: Other than ladder work; contact Supervisor for guidance
Other Requirements: Use of Rubber Floor Mats
New Installation of: Boxes, Switches, Panels, Lights, etc. Flying Objects, Cuts, Electrical Shock ANSI Z87 Approved Safety Glasses, Electrial Rated shoe/boot, Hardhats as Needed.
Fall Protection: Other than ladder work; contact Supervisor for guidance
General Maintenance & Hand Tools
Boom/Arial Lift – General Tasks Heights, Overhead Hazards Mechanix Style or Leather Work Gloves, Closed toe shoe, Long Pants, Hardhat
Fall Protection: Harness and Lanyard
Elevator Inspection -Work in Progress Flying & Falling Objects, Heights ANSI Z87 Approved Safety Glasses, Closed toe shoe, Long Pants, Hardhat
Fall Protection: Fall Protection As needed (Fall Exposure greater than 6ft)
Other Requirements: Hearing Protection as Needed
Elevator Pit Assessment Heights, Overhead Hazards ANSI Z87 Approved Safety Glasses, Closed toe shoe, Long Pants
Fall Protection: Fall Protection As needed (Fall Exposure greater than 6ft)
Other Requirements: Work may require following the University’s Permit Required Confined Space Entry Program, and also the Lockout Tagout Program
Excavation Inspection / Monitoring Flying Objects/Dusts, Cuts, Sound Levels, Falling Objects Closed toe shoe, Long Pants, Hardhat
Fall Protection: Fall Protection As needed (Fall Exposure greater than 6ft)
Other Requirements: Hearing Protection as Needed
General Cleaning (dusting w/ cling rags, mopping, windows, etc.) Flying Objects & Dusts ANSI Z87 Approved Safety Glasses, Rubber Gloves, Closed toe shoe
General Duties (moving ceiling tiles, changing filters, etc.) Flying Objects/Dusts ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Long pants
Jack Hammering and Drilling Observation Flying Objects/Dusts, Sound Levels, Falling Objects ANSI Z87 Approved Safety Glasses, Closed toe shoe, Long Pants, Hardhat, Hearing Protection either Plugs or Muffs
Job Site Inspection – No Work In Progress ANSI Z87 Approved Safety Glasses, Closed toe shoe, Long Pants
Fall Protection: Fall Protection As needed (Fall Exposure greater than 6ft)
Job Site Walk Through – Work In Progress Flying & Falling Objects, and Dusts ANSI Z87 Approved Safety Glasses, Closed toe shoe, Long Pants, Hardhat
Fall Protection: Fall Protection As needed (Fall Exposure greater than 6ft)
Other Requirements: Hearing Protection as Needed
Setup or Tear Down of Tables, Chairs, and Staging Flying Objects or Dusts, Cuts, Falling Objects Mechanix Style or Leather Work Gloves, Closed toe shoe
Other Requirements: Follow Safe Lifting Practices when repetitively moving items.
Trucking and Moving Furniture Flying Objects or Dusts, Cuts, Falling Objects Mechanix Style or Leather Work Gloves, Closed toe shoe
Other Requirements: Follow Safe Lifting Practices when moving large items.
Welding Observation Flying/Piercing & Hot Objects, Falling Objects ANSI Z87 Approved Safety Glasses, Closed toe shoe, Long Pants and Long Shirt
Other Requirements: Welding Helmet or Glasses
Grounds Maintenance
Chainsaw or Sticksaw Flying, Falling, and Piercing Objects/Sound levels Mechanix Style or Leather Work Gloves, Steel Toe Boots or Slip over Steel Cap, Chainsaw Chaps
Other Requirements: Chainsaw Helmet with Face Shield and Hearing Protection
Irrigation Servicing Flying Objects or Debris ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants, Hearing Protection either Plugs or Muffs
Leaf Blowers Flying Objects/Sound Levels/Dust Particulate ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants, Hearing Protection either Plugs or Muffs
Leaf Vacuum Sound ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Hearing Protection either Plugs or Muffs
Manual Pruning (overhead) Flying, Falling, and Piercing Objects ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants, Hard Hat
Mowing (Riding) Flying Objects/Sound Levels/Struck by ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Hearing Protection either Plugs or Muffs
Mowing (Walk-Behind) Flying Objects/Sound Levels/Struck by ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants, Hearing Protection either Plugs or Muffs
Mulching Flying Debris, Cuts ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear
Power Pruner & Sweeper Flying Debris/Sound levels ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants, Hearing Protection either Plugs or Muffs
Snow Blowing Flying Objects/Sound levels/Slips and Trips ANSI Z87 Approved Safety Glasses, Insulated Cold Weather Gloves, Insulated Winter Boot, Long pants, Hearing Protection either Plugs or Muffs
Snow Shoveling Slips and Trips Insulated Cold Weather Gloves, Insulated Winter Boot, Long pants
String Trimming Flying and Piercing Objects/Sound Levels ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants, Hearing Protection either Plugs or Muffs
Wood Chipper Flying, Falling, and Piercing Objects/Sound levels ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Chainsaw Chaps, Hard Hat, Hearing Protection either Plugs or Muffs
Hot Work Practices
Braising – Large Tank Flying Objects, Hot Objects, Falling Objects ANSI Z87 Approved Safety Glasses, Leather Work Gloves, Closed Toe Footwear, Cotton Coveralls
Fall Protection: Fall Protection as needed. If working above 6′ contact supervisor.
Braising – Small Tank Flying Objects, Hot Objects ANSI Z87 Approved Safety Glasses, Leather Work Gloves, Closed Toe Footwear, Cotton Coveralls
Fall Protection: Fall Protection as needed. If working above 6′ contact supervisor.
Copper Soldering / Roof Torching Flying Objects, Hot Objects ANSI Z87 Approved Safety Glasses, Leather Work Gloves, Closed Toe Footwear, Cotton Coveralls
Fall Protection: Fall Protection as needed. If working above 6′ contact supervisor.
Other Requirements: Follow UVM’s Hot Work Permit Program for all spark generating activities.
Soldering Flying Objects, Hot Objects ANSI Z87 Approved Safety Glasses, Leather Work Gloves, Closed Toe Footwear, Cotton Coveralls
Fall Protection: Fall Protection as needed. If working above 6′ contact supervisor.
Torch Cutting and Grinding Flying/Piercing & Hot Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Leather Work Gloves, Closed Toe Footwear, Cotton Coveralls, Hearing Protection either Plugs or Muffs, Faceshield
Fall Protection: Fall Protection as needed. If working above 6′ contact supervisor.
Other Requirements: Follow UVM’s Hot Work Permit Program for all spark generating activities.
Welding Flying/Piercing & Hot Objects, Falling Objects Welding Gloves, Closed Toe Footwear, Apron and Arm Guards, Welding Helmet
Fall Protection: Fall Protection as needed. If working above 6′ contact supervisor.Other Requirements: Follow UVM’s Hot Work Permit Program for all spark generating activities.
Plumbing & HVAC
General Duties (moving ceiling tiles, changing filters, etc.) Flying Objects/Dusts ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Long pants
Maintenance – Air Handling Units Flying Objects & Cuts ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants or Coveralls
Other Requirements: Reference Non-Permit Confined space procedures.
Maintenance – Boiler Flying Objects and Dust, Cuts ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Coveralls, P100 1/2 Face
Maintenance – Circulator Pumps Flying Objects, Cuts, Falling Objects ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants and no loose clothing
Maintenance – Compressors (AC and Air) Flying Objects, Cuts, Falling Objects ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants and no loose clothing
Maintenance – Leaks and Plugs (w/ a snake) Flying Objects, Splashes, Cuts ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Rubber Boots or Slip Booties, Coveralls
Maintenance – Plugs (w/ a chemical) Splashes, Chemicals ANSI Z87 Approved Safety Glasses, Rubber Gloves, Rubber Boots or Slip Booties, Coveralls
Maintenance – Steam and Sewer Holes/Vaults Flying & Falling Objects, Dusts, Cuts, Splashes ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Rubber Boots and/or Waders, Coveralls, Hard Hat
Fall Protection: Body Harness
Other Requirements: Reference Permit-Required Confined Space Program.
Pipe Threading Flying Objects, Cuts, Falling Objects ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear
Power Tools – Air, Fuel, Electric
Cutting Lumber – Circular Saw, Sawzall, Jig Saw Flying Objects/Dusts, Cuts, Sound Levels ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long Pants, Hearing Protection either Plugs or Muffs
Cutting Wheel or Grinding (Small Tasks) Flying Objects, Cuts or Hot Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long Pants, Hearing Protection either Plugs or Muffs
Other Requirements: Follow UVM’s Hot Work Permit Program for all spark generating activities.
Drilling – Core Flying Objects/Dusts, Cuts, Sound Levels, Falling Objects ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long Pants, Hardhat, Hearing Protection either Plugs or Muffs
Drilling – Press and Hand Flying Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Long Pants, Hearing Protection either Plugs or Muffs
Hammer Drilling Flying Objects and Dust, Sound Levels ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long Pants, Ventilation or Respirator w/ P100 Filters, Hearing Protection either Plugs or Muffs
Pipe Threading Flying Objects, Cuts, Falling Objects ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long Pants
Planer (Power Hand) Flying Objects, Sound Levels ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Long Pants, Hearing Protection either Plugs or Muffs
Power Trenching Flying Objects/Dusts, Cuts, Sound Levels ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long Pants, Hearing Protection either Plugs or Muffs
Power Washer Flying Mists ANSI Z87 Approved Safety Glasses, Rubber Gloves, Closed Toe Footwear, Coveralls or Rain Suit
Saw – Circular Flying Objects/Dusts, Cuts, Sound Levels ANSI Z87 Approved Safety Glasses, Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants, Hearing Protection either Plugs or Muffs
Shop Tools – Sander, Bench Saw, Drill Press, Shaper Flying Objects ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Long pants & No Loose Clothing, Hearing Protection either Plugs or Muffs
Recycling & Surplus
Bagged Waste – Pick Up Cuts, and Physical Contamination Mechanix Style or Leather Work Gloves, Closed Toe Footwear
Other Requirements: Follow Safe Lifting Practices when handling bags.
Large Contents – Pick Up (furniture, equipment, appliances, etc) Cuts and Heavy Objects Mechanix Style or Leather Work Gloves, Closed Toe Footwear, Long pants
Other Requirements: Follow Safe Lifting Practices when moving large items.
Materials Drop Off at M.R.F. (Williston) Flying Objects and Sound Levels ANSI Z87 Approved Safety Glasses, Closed Toe Footwear, Long pants, Hardhats as Needed., Hearing Protection either Plugs or Muffs
Totter Cart – Pick Up Cuts, and Possible Falling Objects As needed, Mechanix Style or Leather Work Gloves, Closed Toe Footwear
Totter Cart – Washing (Simple Green Cleaner) Sprays/Splashes ANSI Z87 Approved Safety Glasses, Closed Toe Footwear